Self-edged concealed snap fasteners are made of brass. The product is resistant to rust. Self-edged concealed snap fasteners are used when it is desired that the fastener remains inside the fabric. They are particularly useful for shirts, work clothes, jackets, coats, bodysuits, knitwear, and denim shirts, allowing the fabric to close and open by bringing the two edges together. Since normal 54-inch fasteners cause bulging at the top of the fabric, using 54-inch self-edged concealed snap fasteners is preferable.
Self-edged concealed snap fasteners consist of 4 parts:
These are:
54-inch self-edged concealed snap fasteners,
54-inch female,
54-inch male,
54-inch leg
parts.
Application:
With special fastening molds;
Hand press,
Hand machine,
Motorized and automatic machines.
Measurement:
54 self-edged concealed covers, manufactured in various sizes and dimensions, can be produced by Ata İmalat according to the dimensions specified in the reference table.
Logo;
A logo cannot be applied to the 54 self-edged concealed covers.
Features;
By performing test fittings of the 54 self-edged concealed covers on mock-ups you send to Ata İmalat, we can provide clear information about the product's usability.
It is important that there is no difference in thickness at the fitting location. We can also provide you with a report on how to fit it by preparing a data sheet. Since the 54 self-edged concealed covers are generally raw material, we supply them. If desired, a color can be chosen from our coating color chart.
For orders and information, you can contact our customer representatives via the contact page and request samples before ordering.
